User Manual
Table Of Contents
Installation
For installation Use a CU wire of at least 1.2 square millimeters for the DC output.
On the input side, 100-240V ~ 50/60Hz connect MTP250 series PSU to RCD.
Mounting
Use provided steel clamp and guide through holes then secure the device to the mast.
Or use provided screws and secure device to the wall, use dowels depending on the wall material.
Accessories
The package includes:
CLAMP1-2_ Hose Clamp SUS304 (Philips type; 9mm; clamping diameter range 25-70mm) with EPE bag.
SET1_ K-77 Fastening set.
Operation Environment
Operating temperature: -40°C to 70°C
Ingress Protection - IP 67