Brochure

QRT 5
QRT 5
The QRT 5 is a rugged outdoor at panel antenna, with a built in
RouterBOARD. The device has a 24dBi antenna and a high power
5GHz wireless transmitter.
Inside is the high power RB911 dual chain wireless device (see
separate brochure), with high performance, high output power wireless
transmitter. It has a Gigabit Ethernet port, to fully utilise the benet of
802.11n high speed wireless.
Easy to use and quick to deploy, QRT is ideal for point to point links.
High power integrated antenna
TX power / RX sensitivity
TX/RX at MCS0 30dBm / -96dBm
TX/RX at MCS7 24dBm / -78dBm
TX/RX at 6Mbit 30dBm / -96dBm
TX/RX at 54Mbit 27dBm / -80dBm
Frequency range 4900-5920MHz
Model QRT 5 (RB911G-5HPnD-QRT)
Features 1 Ethernet, Gigabit, High power, Dual chain
CPU Atheros AR9342 600MHz network processor
Memory 64MB DDR onboard memory
Data storage 128MB NAND memory chip
Ethernet One Gigabit port with Auto-MDI/X
Wireless Built in 5GHz 802.11a/n (AR9342)
Wireless regulations Specic frequency range may be limited by country regulations
Extras beeper, signal and status LEDs, voltage and temperature sensors
Expansion -
Power options PoE: 8-30V DC on Ether1 (Non 802.3af).
Unit dimensions 309x320x50mm
Max consumption 11W at 24V
OS MikroTik RouterOS, Level4 license (supports wireless CPE/PtP and AP mode)
Included
QRT wireless device, precision mounting bracket, U bolts, pole clamp, screw kit,
24V 0.8A power adapter, Gigabit PoE injector
Frequencies 4.9-5.875 GHz
Gain 24 ± 1 dBi
VSWR 1.37 : 1
3 dB Beam-Width, H-Plane 10.5°
3 dB Beam-Width, E-Plane, typ. 10.5°
Polarization Dual, Vertical and horizontal
Port to Port Isolation -50 dB
Cross polarization, min -25 dB
Front to Back Ratio, min 35 dB