User Manual
Table Of Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
NetMetal-series
This User Manual covers NetMetal models:
NetMetal 5,
NetMetal 5SHP,
NetMetal 5 triple,
NetMetal 5SHP triple.
The NetMetal is a solid and waterproof outdoor device. It has a high power wireless interface, and one Gigabit Ethernet connector, which supports MDI-X
auto-detection. The device has two or three RP-SMA connectors for connecting external antennas (depends on model). The device is packaged with a 24
V power adapter, a PoE injector, and two mounting loops. There are four models available – two Three-chain devices (with miniPCIe slot and without), and
two Dual-chain models (with miniPCIe slot and without). Extra places for more RP-SMA connectors are available on the unit in this case.
First use
Connect the device to the included PoE injector with Ethernet cable;
Connect the PoE injector into the computer;
Connect the power adapter to the PoE injector;
Download WinBox configuration tool ;https://mt.lv/winbox
Default IP: 0.0.0.0, user name: and there is no password, use
admin
Neighborstab and connect through MAC address;
DHCP Client enabled on the bridge;
Once connected configure the device, so it has an active Internet connection ;https://mt.lv/configuration
Upgrade the RouterOS software to the latest version ;https://mt.lv/upgrade
In the "QuickSet, CPE" menu set up the following: Choose your country, to apply country regulation settings;
Set the antenna gain, depending on the antenna used;
Set up your router password in the bottom field.
Mounting
The NetMetal is designed to be used outdoors and mounted on pole or DIN rail.
When mounting, please ensure that the cable feed is pointing downwards.
The IP rating scale of this device is IP66. We recommend using Cat6 shielded cables.
Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of this
equipment in the residential environment could cause radio interference.
Mounting and configuration of this device should be done by a qualified person.
The mounting hose clamp is provided with the package.