Illustrated mounting guide for LHG
1 Use the provided LHG mounting kit, 1/2 wrench and hex key. The tools are not included in the kit. 2 Place your LHG mount on the back of the dish and fix it with the 4 head screws from the front.
Make sure the mount is well fixed. 4 Put the dish to the pole and apply provided U bolt to fix the product to the pole.
3 3 5 2 2 1 1 Use the provided M8 washers and nuts in the order that is specified in the image. Tighten the nuts with the 1/2 wrench.
