Brochure
4
LtAP LR8 LTE kit
Run a secure VPN from the oce directly to your home, apply specific firewall rules, use IPsec
hardware acceleration, VLAN, DHCP, e-mail or SMS notifications, and so on. With RouterOS
scripting you can automate a lot:
• modify queues based on bandwidth usage;
• complex trigger notifications, such as “Your bandwidth has reached X for Y minutes!”
• backups and setup of additional devices, and so much more!
We also include a free handy tool for centralized management of all your wireless MikroTik
devices – the CAPsMAN. Unlike traditional controller software, CAPsMAN doesn’t require a
separate device to run, it can use any existing RouterOS device in your network.
We have been making our own software since 1996. With each new version our priority
remained the same: to provide users with the freedom to explore dierent setups and always
have the right tools for the job. Without unnecessary paywalls.
RouterOS – extreme versatility
Specifications
Product code RBLtAP-2HnD&R11e-LTE&LR8
CPU Dual-core MediaTek MT7621 880 MHz
Size of RAM 128 MB
Storage 16 MB flash
Number of 1G Ethernet ports 1
Wireless 2.4 GHz 802.11b/g/n dual-chain
Wireless antenna max gain 2.5 dBi
LTE antenna max gain 4 dBi (with u.FL connector)
Antenna beam width 360°
LTE category 4 (150 Mbps downlink, 50 Mbps uplink)
3G category R7 (21 Mbps downlinks, 5.76 Mbps uplink)
2G category Class12
Dimensions 170 x 162 x 40 mm
Operating temperature -40°C to +70°C
Operating system RouterOS, License level 4
SIM slots 3 (Slot #2 and slot #3 available, Slot #1 is not connected to the LTE interface)
USB port* 1 USB 2.0 port type A
Built-in GPS Yes
Serial port RS232
* USB port may not be used in the current configuration. Remove the R11e-LR8 to access the USB functionality.