User Manual

LtAP kit-series
LtAP kit series models:
LtAP LTE kit
LtAP 4G kit
LtAP LTE6 kit
The LtAP kit is a wireless access point with three SIM card slots for cellular data modems.
Quickstart
Please follow these quick steps to set up your device:
Unscrew two screws and remove doors to access all ports. Please see the section.Mounting
Connect your Internet cable to the Ethernet port (this is optional if using LTE as the primary connection).
Insert the SIM card into the SIM 2 slot (middle).
Connect GPS antenna (optional),(see ).GPS
Mount unit in your desired place (see ).Mounting
Choose your powering solution (see ).Powering
Set your computer IP configuration to automatic (DHCP).
From your PC or smartphone, connect to the wireless network name which starts with "MikroTik".
Once connected to the wireless network, open in your web browser to start configuration, since there is no password by https://192.168.88.1
default, you will be logged in automatically.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, to apply country regulation settings, and set up your password on the screen that loads.
Extension slots and ports
Built-in 2 GHz wireless access point module, AP/station/bridge/p2p modes are supported. Onboard PIF antennas built-in, as well as MMCX
connectors for external antennas (software selectable).
Two miniPCIe slots and three SIM slots.
Built-in GPS module with an external SMA connector.