Brochure

SXT 2
Approximately 60° beamwidth in all polarizations
SXT 2
SXT is a low cost, high speed 2GHz outdoor wireless device, now also available as a
high power Gigabit, or as a low cost Lite version. SXT can be used for point to point
links, as a CPE for point to multipoint installations or even as an AP/Sector (G model)
because of it’s wide beamwidth antenna.
Complete with a ready to mount enclosure and built-in 10dBi antenna, the package
contains everything you need to set it up in a matter of minutes.
Model SXT 2 SXT Lite2
Product code RBSXTG2HnD RBSXT2nDr2
CPU AR9344 600MHz
Memory 64MB RAM
Ethernet
10/100/1000 (Gigabit) Ethernet port
L2MTU frame size up to 4076
10/100 Ethernet port
Wireless Onboard dual chain 2GHz 802.11b/g/n.10kV ESD protection on each RF port
Wireless
regulations
Specic frequency range may be limited by country regulations
Extras
Reset switch, beeper, voltage and
temperature monitors
Reset switch, beeper
LEDs Power LED, Ethernet LED, 5 wireless signal LED
Power input PoE in: 8-30V DC. Packaged with 24V PSU and passive PoE injector
Dimensions 140x140x56mm
Power
consumption
Up to 7W Up to 8W
Operating temp. -40°C .. +70°C tested
License Level 4 license (CPE, PtP or AP as sector) Level 3 license (CPE or PtP modes)
Package contains
SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE
injector, 24V 0.8A power adapter (SXT 2), 24V 0.38A power adapter (SXT Lite2), quick
setup guide
Certications FCC, CE, ROHS
SXT 2 SXT Lite2
TX/RX at MCS0 32dBm / -95dBm 27dBm / -95dBm
TX/RX at MCS7 25dBm / -74dBm 22dBm / -77dBm
TX/RX at 6Mbit 32dBm / -96dBm 27dBm / -95dBm
TX/RX at 54Mbit 29dBm / -80dBm 23dBm / -80dBm
Antenna
Dual polarization 2GHz antenna, 10dBi, -18 dB port to port isolation,
Beam-Width: H-Plane, E-Plane typ. 60°
60°
24V 0.8A Adapter
Mounting ring Pole mounting bracket PoE injector