User Manual

5.
6.
Fix the Ethernet cable to the pole using zip ties, less than one meter from the unit, to avoid the cable being pulled out of the port;
Check mounting angle and positioning.
When mounting outdoors, please ensure that any cable openings are directed downwards. Use POE injector and proper grounding, this device has a
specially designed grounding connector under the port cover. Recommended using Cat6 cable. The IP rating scale for this device is IP54.
The SXT device has a sliding door, behind which the Ethernet ports and the reset buttons are located. This door can be also secured shut with a screw in
the provided screw hole.
When using both Ethernet ports, make sure to cut a wider cable opening in the plastic door. You can use pliers to tear out the plastic piece that is
protecting the cable opening. When closing the plastic door, make sure to apply pressure, until it "clicks" into place.
Mounting and configuration of this device should be done by a qualified person.
Grounding
Extension slots and ports
One Ethernet (10/100 Mbit or Gigabit, depends on model), supporting automatic cross/straight cable correction (Auto MDI/X), so you can use
either straight or cross-over cables for connecting to other network devices.
One Integrated Wireless with a built-in 26-degree directional antenna, max gain 16 dBi.
Reset button
The routerBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when the green LED starts flashing, to reset RouterOS configuration to defaults.
Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS
over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
DC EU/US Switching Power Supply 24 V;
Hose Clamp SUS304 (Philips type; clamping diameter range 35-70 mm);
POE Injector with shielded connector;
Pole mounting bracket;
Specifications
For more information about this product, specification and pictures please visit our web page: https://mikrotik.com/product/RBSXTG-6HPnD
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only.
The installation infrastructure (towers and masts), as well as the router itself, must be properly grounded. The device includes a grounding wire
attachment connector behind the case door. Attach your grounding wire to the grounding connector, then attach the other end of the grounding
wire to the grounded mast. This is to substantially reduce the risk of ESD and lightning damage.