User Manual

Pull the cover in the opposite direction from the device to remove it.
Reassemble.
Buttons and jumpers
The routerBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when the green LED starts flashing, to reset RouterOS configuration to defaults.
Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS
over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Included items
Operating system support
The device only supports RouterOS software with the version number at or above what is indicated in the RouterOS menu /system resource. Other
operating systems have not been tested.
Notes
This device meets the Maximum TX power limit per ETSI regulations. The operational mode in the 60 GHz band: 58.32 GHz, 60.48 GHz, 62.64 GHz. This
device is certified for outdoor use in Point to Multipoint applications. In the following countries this device cannot be used in Fixed Point-to-Point
applications:
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE