User Manual

ManualsBrandsMikroTik ManualsComputers & AccessorieswAP ac LTE6 kit

Table Of Contents

wAP ac kit-series

wAP ac kit-series

This manual cover wAP ac series models:

wAP ac LTE kit

wAP ac 4G kit

wAP ac LTE6 kit

This device needs to be upgraded to RouterOS v6.46. or the latest version to ensure compliance with local authority regulations.

Note. The information contained here is subject to change. Please visit the product page on

www.mikrotik.com for the most up to date version of this

document.

Quickstart

Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see ).Bottom Lid

Insert the SIM card into the slot with the chip facing up.

Choose your powering solution, please see the section for possibilities.Powering

Open network connections on your PC and search for the SSID that begins with "MikroTik".

Connect to the wireless network, open in your web browser to start the configuration.https://192.168.88.1

User name: a and there is no password by default you will be logged in automatically to the Quick Set screen.

dmin

Update the device by clicking the "Check for updates" button on the right side and updating your RouterOS software to the latest version to

ensure the best performance and stability. Must have a valid SIM card inserted.

To manually update the device, please gohttps://mikrotik.com/download

Choose ARM packages for this device and download them to your PC.

Upload downloaded packages to the WebFig "Files" menu and reboot the device.

Updatingyour RouterOS software to the latest version will ensure the best performance, stability, and security updates.

To personalize your wireless network, SSID can be changed in the fields "Network Name";

Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.

Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Summary of content (14 pages)

PAGE 1
wAP ac kit-series This manual cover wAP ac series models: wAP ac LTE kit wAP ac 4G kit wAP ac LTE6 kit This device needs to be upgraded to RouterOS v6.46. or the latest version to ensure compliance with local authority regulations. It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
PAGE 2
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time. Click on the "Apply Configuration" to save changes. MikroTik mobile app Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point. 1. 2. 3. 4. 5. 6. Scan QR code and choose your preferred OS. Install and open the application.
PAGE 3
The device can be mounted in several ways: pole, wall, ceiling or it can be placed in a specially designed Mikrotik holder which comes with the package. The package also includes a drill hole template with detailed mounting instructions, to help you with the Ethernet cable installation and attachment to a ceiling or a wall. Steel bracket to put on the other side of a dropdown ceiling tile and two screws and wall anchors. Zip ties or steel clamps for mounting on the pole.
PAGE 4
It's recommended to secure Ethernet cable to the pole using zip ties. With the distance from the device approximately 30 cm. Mounting unit on the wall: 1. Use included a template to mark spots for drilling holes. And if needed for Ethernet cable. Align accordingly, it will depend on how the device will be mounted finally. 2. Insert dowels if needed, depends on wall structure and material. 3. Place included a steel bracket on the wall. 4. Use screws to secure it in place. 5.
PAGE 5
Avoid mounting the device on the low ground spot, as you won't be able to attach and close the bottom latch. Mounting on the ceiling: A Special bracket is included in the package to mount on the drop ceiling. As it consists of two parts, to be attached on both sides of the ceiling tile. 1. Use the template to mark spots for holes. 2. Place both mounting brackets on the spot. 3. Secure them together using screws. Continue assembling in the same manner if mounting on the wall. 1. 2. 3. 4.
PAGE 6
Pull the cover in the opposite direction from the device to remove it. Reassemble. Expansion slots and ports Integrated two Wireless modules operating at 2.4 GHz and 5 GHz, supporting AP/CPE/P2P/repeater modes. Two Gigabit Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or crossover cable can be used for connecting to other network devices. miniPCIe slot and SIM slot (can't be used separately) to be used with a modem.
PAGE 7
2. Remove both screws below the power jack and slide out the wAP PCB board; 3. Disconnect the grey uFL connector from the MAIN antenna connector of the modem, disconnect the black cable from the other (or AUX) connector; 4. Remove two plastic doors using a flat screwdriver or similar tool and feed antenna wires through the holes and connect to the LTE6 card installed; 5. After you have reinserted the wAP board into the case and secured it with the screw that was removed earlier; 6.
PAGE 8
SIM slot usage SIM card slot is designed to use with Micro SIM cards. Nano SIM cards have different thickness, usage with adapter are not recommended. Buttons and jumpers The reset button has three functions: Hold this button during boot time until the LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds).
PAGE 9
Operating system support The device supports RouterOS software version 6.46. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. Notice The Frequency band 5.470-5.725 GHz isn’t allowed for commercial use.
PAGE 10
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 11
CE Declaration of Conformity Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products CS Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU.
PAGE 12
https://mikrotik.com/products IS Hér með lýsir Mikrotīkls SIA því yfir að RouterBOARD er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi veffangi: https://mikrotik.com/products LT Aš, Mikrotīkls SIA , patvirtinu, kad radijo įrenginių tipas RouterBOARD atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu: https://mikrotik.
PAGE 13
Frequency bands terms of use Frequency range (for applicable models) Channels used Maximum Output Power (EIRP) Restriction 2412-2472 MHz 1 - 13 20 dBm Without any restriction to use in all EU Member States 5150-5250 MHz 26 - 48 23 dBm Restricted to indoor use only* 5250-5350 MHz 52 - 64 20 dBm Restricted to indoor use only* 5470-5725 MHz 100 - 140 27 dBm Without any restriction to use in all EU Member States * It is the customer's responsibility to follow local country regulations, inclu
PAGE 14
produto. Mais informações em {+}https://mt.lv/help-pt+ RO. Instruciuni de utilizare: Conectai adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a configura produsul. Mai multe informaii în {+}https://mt.lv/help-ro+ SK. Navodila: Priključite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Več informacij v {+}https://mt.lv/help-sk+ SL. Návod na použitie: Pripojte napájací adaptér k zapnutiu prístroja. Otvorte 192.168.