User Manual

Unscrew two factory attached screws.
Place the thermal pad to the heat sink plate.
Install modem to the miniPCIe slot and secure with previously removed screws. Tightening torque 0,3 Nm.
Attach antenna cables to the modem (see " ").wAP R ac#Antenna usage
Reassemble.
Antenna usage
The device has two internal antennas to connect to the modem. Also, it is possible to connect to the external antennas by adding cable connectors,
product code – ACSMAUFL. https://mikrotik.com/product/acsmaufl
Please connect and disconnect the antenna, when the device is turned off!
Install modem (see " ").wAP R ac#MiniPCIe usage