User Manual

Attach internal antenna cables to the installed modem or use external antenna cables. Black cable to the main connector of the modem and gray
cable to the aux connector. Use rubber/glue to secure them in place.
Optional – External antenna. To mount SMA cable connectors to the base of the device using a 6.5 mm drill to make mounting points - A.
Remove plastic doors to gain access to cables - B.
Secure SMA cable connector in the drilled hole A and guide U.FL end through the opening - B.
Connect U.FL ends to the modem.
Secure SMA connectors with washers to the bottom of the device to prevent water contamination. The white washer should be placed on the
inner side and red washer on the outer.
Expansion slots and ports