User Manual

1.
2.
3.
4.
5.
6.
7.
8.
9.
Gigabit Ethernet port accepts PoE 802.3af/at.
Gigabit Ethernet port.
DC jack for power adapter 10 – 57 V.
Reset button.
SIM card slot.
LED indicating a power state of the device.
LED - user-defined.
LED Indicating the activity of the LTE network.
Plastic doors for SMA cables.
MiniPCIe slot.
Integrated Wireless module operating at 2.4 GHz, 802.11b/g/n and 5 GHz, 802.11a/n/ac protocol.
Configuration
The device is configured as an AP router. Eth1 is blocked by the firewall, you can access router for configuration through the wireless interface.
We recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best
performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform with local
regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: . In case the IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC https://mt.lv/help https://mt.lv/winbox
address of the device from the LAN side. When using Winbox on login the default configuration settings will be shown.
For recovery purposes, it is possible to boot the device for reinstallation, see section .wAP R ac#Buttons and Jumpers
Buttons and jumpers
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10
seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device: