User Manual
Table Of Contents
The magnet is used on the reed switch to change the tag's operating modes as described above. As soon as the magnet is detected (the reed switch is
activated), the LED will start flashing for the next 5 seconds (first 5 seconds) and, then, stop. It can help you identify that 5 seconds have passed and that
you can remove the magnet to enter configuration mode.
Initial steps
Install the "MikroTik Beacon Manager" application and run the app.
For Android devices, you can find it following the .link
Upon the first login, you will see the list of the nearby devices (devices in either advertising mode or configuration mode):