Brochure

A combined 1.25G SFP, 10G SFP+
and 25G SFP28 module.
XS+31LC10D
Specifications
XS+31LC10D
SFP, SFP+, SFP28 COMPATIBLE MODULE HIGHEST EFFICIENCY FOR THE LOWEST COSTPERFECT FOR MULTIPORT SETUPS
This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality for the same
price. We have added 25G SFP28 support – so you can use one module in all your setups. Perfect for the
CCR2004-1G-12S+2XS connectivity router and any other multiport devices.
Optical characteristics Min. Max. Unit Note
Transmitter
Output optical power (Avg.) -7.0 2.0 dBm
Receiver
Receiver sensitivity (OMA) -12.0 dBm
LOS-Deasserted (Avg.) -15 dBm
LOS-Asserted (Avg.) -30 dBm
LOS-Hysteresis 0.5 5.0 dB
Electrical characteristics Min. Max. Unit Note
Receiver
Receiver dierential output voltage 1.6 V 1
Receiver LOS Load 4.7 10 kΩ 2
LOS output Voltage-High -50 37.5 uA 3
LOS output Voltage-Low -0.3 0.8 V
Product code XS+31LC10D
Format SFP / SFP+ / SFP28
Connector Dual LC UPC
Mode Single mode
Data Rate 1G / 10G / 25G
Wavelength 1310 nm
Distance 10 km
Units are compatible with non-
MikroTik SFP devices as well.
1. Internally AC coupled, but requires a 100ohm dierential termination at or internal to Serializer/Deserializer.
2. Pull up to VCC on host Board
3. Follow SFF-8419