Installation Instructions

Alternatively, the device can be mounted on one of the three mounting slots on the backside of the device.
• You can use a metal ring for example.
• Use a Phillips screwdriver to loosen the metal ring.
• Slide one end of it through the most convenient of the three mounting slots.
• Position the device on the pole where it will be mounted.
• Slide the loose end of the mounting ring back to its closing latch and use the screwdriver to tighten it.
It's recommended to secure Ethernet cable to the pole using zip ties. With the distance from the device
approximately 30 cm.
As an additional option, you can use “quickMOUNT-X” – mounting bracket for easy adjustment can be obtained
separately. Product web page: https://mikrotik.com/product/qm_x
Specially designed for SQ series enables vertical and horizontal adjustment on the pole.
Grounding
The device includes a grounding connection (marked )⏚ which you should connect to the grounding installation of
the tower or building where the device will be used. This is to substantially reduce the risk of ESD and lightning
damage.
See mikrotik.com/products for the latest version of this document. Page 3, Document #52350 Modified on: 27.SEP.2019