Specifications

Getting started MC13xx Users Manual Rev. 1.08
4 Getting started
Before starting to operate the camera, make sure that the following equipment is available:
• Camera MC13xx
• C-Mount Lens
• Mikrotron Support CD
• Image processing system, e.g.: PC, frame grabber and Software
L
The frame grabber must have a Base- or Full Camera
Link® Interface.
Additional items:
1 or 2 standard Camera Link® cables •
•
•
1 Power supply 12VDC, 0.5A min
1 power cable
L
To specify cables see chapter Connector pinning.
4.1 First steps
1. Switch off the image processing system
2. Connect Camera Link® cable between camera and frame grabber.
3. Connect power cable.
4. Unscrew dust protection cover, screw in lens.
5. Switch on the image processing system and camera power supply
10