Specifications

Configuration MC13xx Users Manual Rev. 1.08
This feature allows to trigger an object only once on the dark- to bright edge of the scene. This avoids
retriggering, once the trigger condition was met and the object is still visible within the triggerline after
the image has been output.
Command: :rD
h
<x
7..0
>
<x
7..0
> = 0 ..ffh, number of fulfilled,
sequentially trigger conditions
Response: none
6.18.3 ImageBLITZ® registers
Register Bit Description
r7 0 = 1: activate ImageBLITZ®
r8 6..0 First pixel mod. 10
r9 6..0 Last pixel mod. 10
rA
h
7..0
8
9
Exposure threshold
1: bright object triggers
0: dark object triggers
1: make triggerline visible
rB
h
6..0
8..7
9
Number of exceedings or fall backs, release con-
dition,
X – tracking correction
X – tracking enable.
rC
h
9..0 Address of triggerline
rD
h
7..0 exposure limitation, number of exposures without
exposure condition until an image is captured
Table 6.18-1
Registers r1..r7 are programmed according to image size and position and for Asynchronous operation,
timer .
Register Bit Description
r1, r3..r5 Image size and position
r2
r6
9..0
7..4
Async operation, timer
0fh
Table 6.18-2
27