Instruction manual

6.5.4 Infoline
Attaching information to the recorded images is switched on or off. The information portion is dis-
played as follows:
Framestamp:
The upper part of this section taken from the MotionBLITZ®Director main window shows the remain-
ing part of a recording and the information portion. It contains the following fields with information at
the time of recording:
Field: Content in the example:
Date 09.02.2006
Time 14:00:04
Frame number 42
rel. time after trigger [ms] 43,4 [ms]
Camera profile used Cam profile init
Framerate (944 Hz)
Free text to be entered via “Infotext“ This ist the infotext... ...
This information portion is stored along with the frames while recording in the image information block
in the first image-line to save on frame memory. It is interpreted from that structure for playback and
then attached to the images.
6.5.5 “Infotext...“
Open the window “Edit Info Text“:
The text entered here and confirmed by clicking “OK“ is added to the information
portion in the recording sequence.
MotionBLITZ®Kit Manual Ver.2.0 33