Specifications

MC13xx configuration tool MC13xx Users Manual Rev. 1.19

7 MC13xx configuration tool

The MC13xx configuration tool must be installed on a Windows PC. (Win9x, WinNT, Win2K, WinXP)

by means of the setup software. See also www.mikrotron.de to download the latest version.

This software provides an almost self explaining user interface to modify any camera parameter. The

description of the parameters follows the marked chapters in this user manual.

To use this tool with the camera MC13xx the serial interface is integrated in the Camera Link® inter-

face. You do not need any other additional cable.

7.1 Basic Configuration

File: Save or read settings to or from file.

Set: Select com port. If Inspecta-4D and the cor-

rect cable is used, the MC13xx can be written to

but not being read from.

Load, Write, Read: Profile processing

FPN, Gain …:

Adjusting image

Clock Step:

Clock selection

1.st col…num. of rows:

Adjusting Image

Shutter:

Type of exposure

Frame count (6.17),

gray scale (6.16),

invert trigger (

6.15),

extern clock (

6.14),

digital gain (6.13)

pixelbinning……(6.10)

Info camera:

Read serial number and firmware version

Tx:

Display control strings

Rx:

Display response