Owner manual

ManualsBrandsMilan Technology ManualsComputer AccessoriesMIL-S1600S

MIL-S1600S

User’s Guide

The MIL-S1600S switch is a sixteen port switch that can be used to

build high-performance switched workgroup networks. This switch is

a store-and-forward device that offers low latency for high-speed net-

working. The MIL-S1600S switch has 16 auto-sensing 10/100Base-

TX RJ-45 ports with auto MDI/MDIX and features a "store-and-for-

ward " switching scheme. This allows the switch to auto-learn and

store source address on an 8K-entry MAC address table. Auto

MDI/MDIX allows connection to another switch or workstation without

changing non-crossover or crossover cabling.

Summary of content (4 pages)

PAGE 1
MIL-S1600S User’s Guide The MIL-S1600S switch is a sixteen port switch that can be used to build high-performance switched workgroup networks. This switch is a store-and-forward device that offers low latency for high-speed networking. The MIL-S1600S switch has 16 auto-sensing 10/100BaseTX RJ-45 ports with auto MDI/MDIX and features a "store-and-forward " switching scheme. This allows the switch to auto-learn and store source address on an 8K-entry MAC address table.
PAGE 2
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 Number 950 - CE EN55022 Class A EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. • Cabling RJ-45 ports: Use unshielded twisted-pair (UTP) or shield twisted-pair (STP) cable for RJ-45 connections: Category 3, 4 or 5 cable for 10Mbps connections or Category 5 cable for 100Mbps connections.
PAGE 3
Troubleshooting Features This section is intended to help you solve the most common problems on the MIL-S1600S switch. Incorrect connections • Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections are snug. If that does not correct the problem, try a different cable. • Non-standard cables Non-standard and miswired cables may cause numerous network collisions and other network problem, and can seriously impair network performance.
PAGE 4
Hardware Description Front Panel The Front Panel of the MIL-S1600S switch consists of 16 10/100Base-TX RJ-45 ports The LED Indicators are also located on the front panel of the switch. Rear Panel The 3-pronged power plug is located at the rear Panel of the MILS1600S switch as shown in Figure 2-2. The switch will work with AC in the range 100-240V AC, 50-60Hz RJ-45 Ports (Auto MDI/MDIX): 16 10/100 auto-sensing for 10Base-T or 100Base-TX connections.