Manual

Features
n Conforms to IEEE 802.3, 802.3u, and 802.3x standard
n 16/24x auto-sensing 10/100Mbps Ethernet RJ-45 ports
n Automatic MDI/MDIX ports crossover for 10Base-T and 100Base-TX
n One Extension Slot for 100Mbps Fiber modules ( Optional )
n Auto-negotiation for 10Mbps and 100Mbps
n Back-Pressure-Base flow control on Half-duplex ports
n Pause-Frame-Base flow control on Full-duplex ports
n Store-and-forwarding switching architecture for abnormal packet filtering
n Full wire speed forwarding rate
n 4K-entry MAC address table
n LED-indicators for Power, 10/100M, LK/ACT, Full
n 19” Standard Rack-mount
Package Contents
Unpack the contents of the MIL-S2400 or MIL-S1600 Switch and verify them against the checklist
below.
n MIL-S2400 or MIL-S1600 Switch
n Power Cord
n Four Rubber Feet
n Rack mount kit
n Warranty Card
Figure 1-2. Package Contents
Compare the contents of your MIL-S2400 and MIL-S1600 Switches package with the standard
checklist above. If any item is missing or damaged, please contact your local dealer for service.