MIL-9100X Media Conversion System User’s Guide Sunnyvale, California Minnetonka, Minnesota
LEGAL Trademark Rights © 2004 The MiLAN logo and MiLAN Technology trademarks areregistered trademarks of MiLAN Technology in the United States and/or other countries. Information in this document is subject to change without notice and does not represent a commitment on the part part of MiLAN Technology.
Table of Contents Table of Contents Chapter 1: Introduction Overview of the MIL-9100X .................................................................................. 1-1 Features .................................................................................................................... 1-1 Media Converters ................................................................................................... 1-1 T O C Chapter 2: Installation Installation Requirements..............................
Table of Contents T O C iv MIL-9100X Media Conversion System
Ch ap t e r 1 : In tro d u c tio n Chapter 1 gives an overall description of the MIL-9100X Media Conversion System. 1.1 Overview of the MIL-9100X The MIL-9100X Media Conversion System is an 8-slot rack mount assembly, that can support up to eight different media converters, including a “master” (MiLAN’s MIL-4650) or a “slave” device (MiLAN’s MIL-4655). The master and slave devices are used to manage the MIL-9100X using SNMP.
Introduction Currently, MiLAN Technology’s conversion modules supported include (but not limited to): • MIL-140TRM: Multi-mode media converter; 10BASE-FL to 10BASE-T, I N T R O D U C T I O N • MIL-160TRM: Single-mode media converter; 10BASE-FL to 10BASE-T • MIL-170TRM: Single-mode media converter, 10BASE-FL to 10BASE-T • MIL-180CRM/180TRM: Multi-mode media converter; 100BASE-TX to 100BASE-FX • MIL-190CRM: Single-mode media converter; 100BASE-TX to 100BASE-FX, • MIL-240TRM: Media converter; featuring thre
Ch ap te r 2 : In s ta lla tio n Chapter 2 gives installation information for a MIL-9100X Media Converter System. 2.1 Installation Requirements Before installing the MIL-9100X, make sure you have the following: • MIL-9100X Media Converter System • Power supply (two if necessary) • Two, right-angle bracket assemblies • Eight, 440 × 1/4 phillips-head screws I N S T A L L A T I O N • Power cord • Standard, Phillips screwdriver (not included) Figure 2-1. MIL-9100X, with a no Media Converters Installed 2.
Chapter 2 2. Install the MIL-9100X into a 1U size slot on a rack. Use the phillips head screws (supplied) to secure the device. Note: For safety reasons, MiLAN recommends that two people install the MIL-9100X. One person should hold the unit, while the other secures the MIL-9100X. Also, excessive charring of the unit will damage internal components and void the warranty. 3. Add the extra power supply (if necessary). I N S T A L L A T I O N 4. Populate the bays with media converters and/or SNMP agents.
Ap p end ix A : S p e c ific a tio n s A.1 Diagnostic LEDs Table A-1 describes the status of the unit when an LED lights: Table A-1: Diagnostic LEDs LED Power 1 Power 2 A.
Appendix A S P E C I F I C A T I O N S A-2 MIL-9100X Media Conversion System
Appendix B: Technical Support Services B.1 World Wide Web Server Product information, manuals, new product announcements, programs, applications stories and more can be obtained through the world wide web. Our address is: http://www.milan.com B.2 Internet FTP Server MiLAN has set up an anonymous FTP server for those with access to the internet. The address is ftp.milan.com. Drivers and installation tips are located in the /pub/ MCSys directory. Note: B.
Appendix B disk space • Note any and all error messages • Be specific about the problem(s) B.5 RMA Procedures To return a unit to MiLAN for repair: 1. Call technical support at 408/744-2751 T E C H 2. Technical support engineers will work with users to find the problem. If technical support determines that the unit is defective, a return materials authorization (RMA) will be issued by our RMA administrator who will also provide shipping instructions.
Index Index Hardware features A-1 Hot-swappable 1-1 http //www.milan.com B-1 Numerics I 110/220 VAC A-1 1U slot 1-1, 2-2, A-1 206.40.59.2 B-1 -48 VDC A-1 8-slot rack assembly 1-1 Installation Requirements 2-1 Installation requirements 2-1 Installing a MIL-9100X 2-1 Internet access B-1 Internet FTP server B-1 A L ATM 1-1 LEDs 1-1, 2-2, A-1 B M Bracket assembly 2-1 Fast Ethernet 1-1 Features 1-1 ftp.milan.
Index Auto-switching 2-1 R Return materials (RMA) B-2 authorization S Safety tip 2-2 Second power supply Installation 2-2 SNMP agent 1-1, 1-2, 2-2 Specifications A-1 T I N D E X Technical support B-1 W World wide web server B-1 I-2 MIL-9100X Media Conversion System
MiLAN TECHNOLOGY 1329 Moffett Park Drive Sunnyvale, CA 94089 Part Number: 90000081 Rev.
