Raven Series Standalone Media Converters MIL-RC6113SX-V2 -10/100/1000BASE-T / 1000BASE-SX SC MMF MIL-RC6113LX-V2 – 10/100/1000BASE-T / 1000BASE-LX SC SMF MIL-RC6113GB-V2 – 10/100/1000BASE-T / 1000BASE-X SFP Slot (Empty) USER GUIDE
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
FCC Warning This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Content Introduce.......................................................................................................................2 FEATURES .....................................................................................................................................3 PACKAGE CONTENTS ....................................................................................................................5 Hardware Description ..........................................................................
Introduce The Giga Standalone Fiber Converter is a cost- effective solution for the converting 10/100/1000Base-TX (Auto MDI/MDIX) and pure 1000 Base-T to 1000Base-FX cabling. It can be slotted in Multi-Converter Chassis on up to 10 optional modular converter units, which allows your network connectivity to be more flexible. It also can use stand-alone without slot in Multi-Converter Chassis.
Features IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX Standard IEEE 802.3ab 1000BaseT, IEEE 802.3z 1000BaseSX/LX standards IEEE 802.3x Flow Control and Back pressure Power (Green) UTP SPD: 1000Mbps /100Mbps LED Indicators Lnk/Act: UTP /FIBER FDX: UTP: Full-Duplex mode / Half-Duplex or Link down FIBER: Full-Duplex mode / Link down Fiber: Duplex SC/MINI GBIC 3.
will forced copper port to link down. Switch architecture Jumbo Frame Power Power Consumption Operating Store and Forward 10Kbyte(Pure converter mode)/ 2Kbyte(Switch converter mode) Stand-alone (external adapter):DC 9V / 0.7A 4.
Package Contents Beware of which type of converter module that you have purchased. And, please refer to the package content list below to verify them against the checklist. Stand-alone converter module package contains following items. The Giga Fiber Converter AC-DC Power Adapter User Guide Rack mount ear (only for converter chassis) Compare the contents of your Converter with the standard checklist above. If any item is damaged or missing, please contact your local dealer for service.
Hardware Description The Giga Fiber Converter dimension (L x W x H): 120mm x 85mm x 26mm Front Panel 10/100/1000Base-T to 1000Base-FX converter module The Front Panel of the 10/100/1000Base-T to 1000Base-FX converter module consists of one Giga Fiber port, one copper Port (Auto MDI/MDIX), and 6 LED Indicators (SPD, LK/ACT, FDX, Fiber LK/ACT, FDX/COL, and PWR).
2 1 3 4 2 1 3 4 2 1 3 4 (1) RJ-45 Port (2) LED (3) DIP-Switch (4) Fiber Connector Rear Panel The rear panel contains a power socket. This power socket accepts DC9V voltage and minimum 0.7A supplied current.
Ports Copper Port (Auto MDI/MDIX) of 10/100/1000Base-T to 1000Base-FX converter module: The Ethernet ports will auto-sense for 10Base-T, 100Base-TX, or 1000Base-T connections. Auto MDI/MDIX means that you can connect to another Switch or workstation without changing non-crossover or crossover cabling. Fiber Port: This port is for 1000Base-FX connections. We provide different styles of fiber connectors (SC/SC single-mode/ SFP slot) to meet your needs.
LED Indicators There are 6 diagnostic LEDs located on the Front panel of converter module. They provide real-time information of system and optional status. The following table provides description of the LED status and their meanings for Modular Giga Fiber Converter.
DIP-switch The DIP-switch is used to configure operation mode for LLF (Link Lost Forwarding) and operation mode for Copper/Fiber port. The default value of Dipswitch is OFF.
Converters module Installation This installation is only for mounted in converter chassis converter module. You can follow the steps below to install modular converters. A. Remove the blank bracket by rotating thumbscrew counterclockwise. Put the blank bracket aside, but don’t discard blanket bracket. B. Open the rack mount ear kit. The kit contains two-rack mount ear (with thumbscrew) and four screws. C.
Cabling Using four twisted-pair, Category 5e cabling for copper port connection. The cable between the converter and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long. Fiber segment using single-mode connector type must use 9/125 µm single-mode fiber cable. You can connect two devices in the distance of 10 Kilometers in full duplex operation. For half-duplex operation, the recommended maximum distance is 412 meters (1,352 ft.
Troubles shooting Check the configuration DIP-switch. It must be setting in the same operation mode with the link partner. Select the proper Copper/Fiber cable to construct your network. The single-mode converter must use single-mode fiber cable. Please check that you are using the right cable. Don’t both use multi-mode and single mode. 10900 Red Circle Drive Minnetonka, MN 55344 Tel.: +1.952.941.7600 techsupport@transition.
