User guide

1
1. Introduction
The 16 or 24-port 10/100/1000BASE-T plus 2 combo SFP Slots Switch is an ideal solution
for solving traffic block at the core of the network. It offers 16 or 24 x auto-negotiating
10/100/1000Base-T Gigabit Ethernet ports that can significantly improve your network
backbone performance. This Switch will fit into any enterprise level network to act as an exit
to the backbone switch. It also provides 2 SFP Gigabit port for gigabit network connection.
The 16 or 24-port 10/100/1000BASE-T plus 2 Combo SFP Slots Switch features Auto
MDI/MDIX function for each port. [In general, MDI means connecting to another Hub or
Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX
means that you can connect to another Switch or workstation without changing
non-crossover or crossover cabling. The switch also features a store-and-forward switching
and can auto-learn and store source address on a 8K MAC address table.
Features
 Compatible with IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3z
gigabit fiber and IEEE802.3ab 1000Base-T
 Backplain speeds of
 32Gbps for 16-port
 48Gbps for 24-port
 16 or 24 ports gigabit switch with two COMBO SFP SLOTS
 Automatic MDIX for all ports
 8K entry MAC address table
 10K Jumbo Frame support
 500Kbits Memory buffer
 IEEE802.3x flow control:
 Pause frame for 10/100/1000Mbps full duplex
 Backpressure for 10/100 Mbps half duplex
 2 COMBO SFP SLOTS for SFP transceiver
 Store-and-Forward architecture support