User guide

4
Rear Panel
The 3-pronged power plug, on/off switch, and Ventilation fan are located at the rear Panel
of the 16 or 24-port 10/100/1000BASE-T plus 2 Combo SFP Slots Switch as shown in
Figure 2-2. The Switch will work with AC in the range 100-240V AC, 50-60Hz.
Figure 2-2. Rear panel of the 24-port 10/100/1000BASE-T plus 2 Combo SFP Slots Switch
LED Indicators
The LED Indicators gives a real-time indication of system operating statuses. There are 3
LED-indicators (1000, LNK/ACT, FDX/COL) for each Gigabit port and one Power LED for
unit. The following table provides descriptions of LEDs status and their meaning.
Figure 2-3.LED Indicators example of MIL-S24T2GPA
LED Status Description
Green Power On
Power
Off Power is not connected
Green The port is operating at the speed of 1000Mbps.
1000
Off No device attached or in 10/100Mbps mode
LNK/ACT
Green The port is connecting with the device.