User manual

32
authorize] configuration
command to set the
state of the selected
port.
switch(config-if)#8021x portstate
accept
show 8021x E Displays
a summary of
the 802.1x properties
and also the port
sates.
switch>show 8021x
no 8021x G Disable 802.1x
function
switch(config)#no 8021x
TFTP Commands Set
Commands Level Description Defaults Example
backup
flash:backup_cfg
G Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from
TFTP server
and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#upgrade
lash:upgrade_fw
SystemLog, SMTP and Event Commands Set
Commands Level Description Example
systemlog ip
[IP address]
G Set System log server
IP address.
switch(config)# systemlog ip
192.168.1.100