User manual

65
802.1Q Configuration
1. Enable GVRP Protocol: check the check box to enable GVRP protocol.
2. Select the port that wants to configure.
3. Link Type: there are 3 types of link type.
 Access Link: single switch only, allow user to group ports by setting the same
VID.
 Trunk Link: extended application of Access Link, allow user to group ports by
setting the same VID with 2 or more switch.
 Hybrid Link: Both Access Link and Trunk Link are available.
4. Untagged VID: assign the untagged frame VID.
5.
Tagged VID:
assign the tagged frame VID.
6. Click
Apply
Group Configuration
Edit the existing VLAN Group.
1. Select the VLAN group in the table list.
2. Click
Apply