User manual

having to re-learn a device's MAC address when the disconnected or powered-off device

is active on the network again. User can add / modify / delete a static MAC address.

 Add the Static MAC Address

User can add static MAC address in switch MAC table.

1. MAC Address: Enter the MAC address of the port that should permanently forward

traffic, regardless of the device network activity.

2. Port No.: pull down the selection menu to select the port number.

3. VLAN ID: enter the Mac address’s VLAD ID, if the Mac address belongs to any

VLAN group.

4. Click

Add

5. For deleting the MAC address from filtering table, select the MAC address and

click

Delete

Static MAC Addresses interface

MAC Filtering

By filtering MAC address, the switch can easily filter pre-configure MAC address and

reduce the un-safety. User can add and delete filtering MAC address.