User's Manual

Maintenance/Service
36
MAINTENANCE / SERVICE
Cleaning
Always turn OFF the power, unplug the power cord and remove the battery
before cleaning.
The exterior of the system and display may be wiped with a clean, soft, and lint-
free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol
based glass cleaner to the cloth and wipe.
An air gun is recommended for cleaning water and dust. For salty water please
wipe with fresh water then blow-dry with an air gun. Close all caps tightly
before water cleaning.
Troubleshooting
Should the computer fail to function properly, you may try the following
troubleshooting steps: (Please backup your data before troubleshooting)
•
Check AC adapter, battery, and the power source.
•
Press hardware reset to re-boot the computer.