User's Manual

Chapter Three - 19
Managing Power
Power Conservation
This computer consumes much less power than conventional computers. However, power
consumption may be reduced by configuring the Power Management Setup properly.
It is recommended the power saving functions to be enabled even when not running on
battery power. Power Management will not degrade performance while saving power.
Replacing Battery
When the battery is nearly exhausted, there are two ways to keep your handheld computer
working. Connect the AC adapter and the power cord designed for this handheld computer
to start charging is one method; directly replace a charged battery designed for this
handheld computer may be the other one.
Power Saving Tips
 Turn OFF the LCD backlight when not using the handheld computer.
 Lower the intensity of the LCD backlight.
 Use well with Shut down, Standby and Hibernation.
 Use well with the power management settings in your OS.
Note:
 Always remember to turn OFF the power before replacing the
battery.
 You can change the battery in 30 seconds under standby
mode; otherwise, it may cause the data loss or malfunction of
your handheld computer.