User's Guide

Optional Devices
Chapter Four - 35
BIOS Setup
Security Menu
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set, then this
only limits access to Setup and is only asked for when
entering Setup.
If ONLY the User’s password is set, then this is a
power on password and must be entered to boot or
enter Setup. In Setup the User will have Administrator
rights.
The password length must be in the following range;
Minimum length 3
Maximum length 20
Administrator Password
User Password
HDD Security Configuration:
P1: XXXXXXXXXXXX
Secure Boot
Set Administrator
Password
→←: Select Screen
↑↓: Select Item
Enter: Select
–/+: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
HDD Security Configuration Sub-Menu
Aptio Setup Utility
Security
HDD Password Description:
Allows Access to Set, Modify and Clear Hard Disk
User and Master Password. User Password needs to
be installed for Enabling Security. Master password
can be Modified only when successfully unlocked with
Master Password in POST.
HDD PASSWORD CONFIGRATION:
Security Supported : Yes
Security Enabled : No
Security Locked : No
Security Frozen : No
HDD User Pwd Status NOT INSTALLED
HDD Master Pwd Status INSTALLED
Set User Password
Set Master Password
Set HDD User Password.
***Advisable to Power
Cycle System after setting
Hard Disk Passwords***
→←: Select Screen
↑↓: Select Item
Enter: Select
–/+: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit