User's Guide

Chapter 8 – Maintenance and Service
Cleaning
ALWAYS turn OFF the power, unplug the power cord and remove the battery before
cleaning.
The exterior of the system and display may be wiped with a clean, soft, and lint-free cloth.
If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to
the cloth and wipe.
An air gun is recommended for cleaning water and dust. For salty water please clean with
fresh water then blow-dry with an air gun.
Troubleshooting
Should the tablet computer fail to function properly, the troubleshooting steps below may
be followed.
 Power Problems:
When I turn on the Tablet computer, it does not respond.
- If you are using battery power, check if the battery is charged
- If you are using AC power, ensure that the connection of AC adapter is correct.
I cannot return from Hibernation while on battery power
- The battery might be drained. Please plug the tablet into AC power.
- Hard reset the device by pressing the power button for 4 seconds
Unexpected or improper shutdown causes BIOS to reset to Optimized Default
- This could be a power problem. Please connect the AC power adapter to fix the
abnormal shutdown problem.
 Minimize the configuration, i.e. remove extra peripherals and devices.
 Remove the modules one by one (SSD, Battery, etc.).
 Remove the software suspected.
 Set BIOS fail-safe default.
 Re-install operating system and application software.