User's Manual

Chapter One - 2
Getting Started
Quick Operation
z Loosen the battery screw, remove the battery insulation sheet, and mount
the battery.
z Connect the AC adapter with the computer and start charging the battery
for at least 10 minutes.
z Turn ON the computer by pressing the power switch.
Notice:
z When ambient temperature is under +5℃ (The default setting for this
computer), the system may not boot up immediately. System will beep
with LED heater light flashing to indicate that the heater is functioning. The
frequency of the LED flashing will become faster as the internal
temperature approaches suitable level. After 5~15 minutes, the system
will boot up automatically.
z In the events of emergency, this computer is able to skip heating and boot
up the system immediately by pressing and holding the power switch for
>9 seconds. The speaker will also beep with a special sound. (It is not
guaranteed that all devices on the computer can function properly.)
z Pressing the power switch again during the heating process will shut down
the computer.
z Drivers or applications installation may be necessary for further operation.
Note:
¾ Some operating systems may not support the above-mentioned functions.