Product Manual

Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: A M/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery
Model NO.: RV-9011N (with MP-0011N)
OMNI-DIRECTIONAL CARAVAN TV AERIAL
Frequency range:(LTE Version)
AM:520-1719 MHz
UHF:470-790 MHz
Receiving range: AM/UHF
Gain: 38dB
Noise figure: 3dB
Max. output level: 110dBµV
Impedance: 75Ω
Connector: F-connectors
Power supply: DC 12V/24V
1.Antenna×1
2.Stainless screws
(connecting the TV aerial with the base)×3
3.Plastic base×1
4.Stainless screws
(For the base intalled on the roof)×3
5.TV coaxial cable
(1.3m with F connector, inbult in the TV aerial)
6.Power supply box: (MP-0011N
)×1
7.1.5m coaxial cable (connecting the power supply box with the TV)×1
Technical Specification
Included in Packaging:
Installation Guide:
Connect the power supply box (MP-0011N)
1.5m coaxial cable
Power supply with gain adjuster
DC input wire kits
6
Specially compatible with HDTV of various digital terrestrial signal
(DVB-T,ISDB-T,DMB-T/H,ATSC) and AM radios.
The antenna is surface-treated to withstand impacts from saltwater
and weather conditions
Build-in high gain and low noise amplifier, shielded for minimum
interference.
Waterproof housing design made of UV resistant, injection molded
ABS material with super durability.
Omnidirectional antennas receive LTE, UHF, and AM signal from every
point regardless of the direction you are travelling.
The best digital terrestrial TV reception solution for your boating and caravans
SMD Technology and micro-electronics makes the high quality amplifier, ensure the
excellent antenna performance.
Product features
1
2
2
3
4
4
5
7
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
Figure 1
Power from DC battery. See Figure 1
1. Connect the 3 meters cable from antenna to power supply input "12/24V DC".
2. Connect the 1 meter cable from output connector of power supply unit to DTV receivers or TVs.
3.Connect the DC input wires to the 12V/24V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12/24V DC system of vehicle.
5.Adjust the gain in power supply unit for best signal reception.
Power supply
TV
DC 12/24V
+ -
Powered from DC battery