Owner's Manual

Troubleshooting
*Note: In many respects, a stereo acts much like a computer and occasionally requires a
reboot. In the unlikely event
of product malfunction, a reset can usually fix the issue.
Reset Function: With the unit powered off, press SEEK DOWN then SEEK UP in
succession three times in a row. Once this occurs, the display will read SYS CLR,
indicating a successful reset.
Issue
Cause
Solution
No power
1. Incorrect wiring
1. Double check wiring
2. Fuse is blown 2. Replace fuse
3. Low battery voltage
3. Check voltage of vehicle battery
with multimeter. Voltage must
be at least
11 V.
No Sound
1. Speaker connection
1. Double check connections.
came loose
2. Bad speaker 2. Replace bad speaker with known
good speaker and connect.
3. Output blown 3. Send unit in for repair.
4. Volume too low on 4. Increase volume
of media device
media device
No Reception
1. Antenna not firmly
1. Insert firmly
seated in socket
USB stick not
1. File must be a mp3 1. Convert format to mp3 or wma.
reading
or wma file
While in Bluetooth mode:
No Connection
1. You are not connected
1. Choose "PRV 19"
to the "PRV 19"
address on your
portable media
device.
2. Out of range 2. Bring portable media device closer
to the receiver. Device needs to be
..
within 30'.
3. The connection is 3. Ask the person who first paired to
already in use.
drop out.
7