MILES LUBRICANTS LLC I n n o v a t i v e L u b r i c a n t E n g i n e e r i n g Miles formulations are made from the nest quality of oils, all API approved.
To Our Valued Customers, Back in 1937, a young man by the name of Jack Stern, started a new business selling lubricating oils, which in those years were delivered in wooden barrels in horse drawn wagons. At the very beginning Jack dedicated Miles Lubricants to excellence in every phase of business, quality products, competitive pricing and most important of all, “Customer Service.
INDEX: INTRODUCTION 1 PASSENGER CAR ENGINE OIL 3 HEAVY DUTY 4 HEAVY DUTY – SYNTHETIC 4 TRANSMISSION FLUID 5 GEAR OIL 5 GREASE 6 SPECIALTY GREASES HYDRAULIC FLUIDS 6 7-8 ANTI WEAR HYDRAULIC FLUID 7 RUST & OXIDATION HYDRAULIC FLUID 8 SYNTHETIC HYDRAULIC FLUID 8 SYNTHETIC TURBINE OIL 8 INDUSTRIAL GEAL OIL INHIBITED ELECTRICAL INSULATING OIL METAL WORKING 9 10 11-12-13-14 SLIDEWAY OIL 11 CUTTING FLUIDS 11 MINERAL WATER SOLUBLE 12 SYNTHETIC WATER SOLUBLE FOOD GRADE 13-14 15-16 F
PASSENGER CAR ENGINE OIL MILESYN SB SYNTHETIC BLEND GF- 5/SN PASSENGER CAR ENGINE OILS are specially formulated using synthetic and Group II base oils and high performance additive packages to provide superior performance in gasoline fueled and ex-fueled engines. These oils are formulated for excellent oxidation stability and low temperature properties to insure protection during cold starts.
HEAVY DUTY 15W40 PREMIUM CJ-4 MILES ALL SPEC 15W40 PREMIUM PLUS CJ-4 is a superior lubricant formulated to meet or exceed the warranty requirements of most manufacturers of diesel and gasoline engines. Field tests have shown our CJ-4 oils retain TBN levels for longer periods due to the advanced additive chemistry.
TRANSMISSION FLUID ATF / DEX III - is a premium quality, multi-purpose automatic transmission uid specially formulated for new generation, electronically controlled transmissions. This uid may also be used in previous transmissions built by General Motors, Chrysler, Ford (except where type “F” is required) and most foreign manufacturers. meets and exceeds the requirements of DEXRON IIE, DEXRON II,DEXRON ,DEXRON /MERCON and TYPE A suffix transmission uids.
GREASE SERIES MINERAL GREASES MILES SERIES GREASES are formulated from high viscosity base oil and lithium complex thickener. It contains tackiness additive to enhance retention on lubricant parts. These properties help form an effective seal to help minimize bearing contamination and stay in-place while in service.
HYDRAULIC FLUIDS ANTI-WEAR HYTEX SERIES - are high performance, anti-wear hydraulic oils designed for heavy-duty hydraulic systems operating over a wide range of temperatures. They produce excellent results in a wide variety of high pressure hydraulic systems found on industrial machinery, ships, woodlands and mining operations, and other mobile equipment.
R & O HYDRAULIC FLUID STRATUS R & O SERIES - high quality lubricants recommended for use in steam and gas turbines, as well as in the circulating oils systems of a wide range of industrial machinery.Miles STRATUS T Oils counteract rust and oxidation with blends of our exceptionally pure Hydro Treated (Hydrocracked) base oils, and specially selected additives. These formulations deliver reliable performance and extended service life.
SIRIES ESTECH TURBO - is formulated to provide superior service and very long life in all types of gas turbines. it has excellent oxidation resistance, unsurpassed thermal stability, and excellent carbon and varnish control. MILES ESTECH TURBO meets all stationary turbine manufacturers speci cations and is recommended for all applications, even those where bearing temperatures are well in excess of 500°F.
SERIES MIL-GEAR S - INDUSTRIAL SYNTHETIC GEAR OILS SERIES MIL-GEAR S is full synthetic gear oil, formulated to provide a long uid life with excellent lubricity and wear protection. It offers outstanding protection — even in the most demanding applications.
METAL WORKING CUTTING FLUIDS KLEER-SULF is premium quality medium duty cutting oil. It is an amber colored, sulfurized, compounded from premium quality fatty mineral oil. This cutting oil is formulated for medium to heavy machining operations, such as threading and tapping, and broaching. It is also recommended as semi-base cutting oil which can be blended with mineral oil to address a variety of work situations. KLEER-SULF HD is premium quality heavy-duty cutting oil.
PROPERTIES PRODUC T ISO Viscosity Grade Viscosity cSt @ 40ºC Viscosity Index Copper Strip Corrosion, Rust FZG Load ASTM D 130. 3 h @ 100ºC Protection, Support, DIN ASTM D 665A 51354. Fail Stage 4-Ball Wear, Scar Weld Load, 4- Pour Point. Flash Dia, 20 Kg. 54ºC, Ball EP, ASTM ºC, ASTM D 97 Point, ºC. 1800 RPM. >1 hr, D 2783, kg ASTM D 92 ASTM D 4172, mm WAY LUBE EXTRA LT 32 31 96 18 PASS 13 0.25 200 -31 214 WAY LUBE LT 68 66 96 18 PASS 13 0.
SYNTHETIC WATER SOLUBLE KOOL SOL SS A is a semi-synthetic BIOSTABLE general purpose metalworking coolant containing approximately 20% mineral oil. This product, when diluted with water, forms a translucent amber emulsion which offers excellent workpiece visibility, good lubricity, and superior cooling. MILES KOOL SOL SS A is designed for the machining and grinding of virtually all metals, except magnesium and is formulated without the use of chlorine.
SOL KUT CLEAN A is a low foam alkaline cleaner designed to remove process oils, gummy deposits of oil, grease, swarf and normal shop soils from machine tools, oors, and other hard surfaces.It combines organic and mineral alkalinity builders, detergents, water conditioners and deodorizer for optimum performance. The primary application of MILES SOL KUT CLEAN A is for cleaning machine tool coolant sumps and surfaces. It may also be used for general cleaning with mop and bucket, auto-scrubber or spray washer.
FOOD GRADE SERIES KOSHER USP WHITE OILS are food grade white mineral oils hydro treated with the highest degree of purity, and are stabilized with Vitamin E oxidation inhibitors. MILES KOSHER USP OILS meet requirements set forth in the U.S. FDA regulations 21 CFR 172.878 for use in or on food for human consumption, and 21 CFR 178.3620 for use as a component of nonfood articles intended for use in contact with food for human consumption.
SERIES FOOD GRADE AIR COMPRESSOR OIL - FG COMPRESSOR OIL MILES FG COMP OIL synthetic food-grade compressor lubricant contains high-performance uids and is designed for extended drain intervals. This lubricant meets H1 requirements for lubricants with incidental food contact (FDA 21 CFR 178.3570). SERIES ADVANCED FG COMP OIL - synthetic food-grade compressor lubricant contains high-performance uids and is designed for extended drain intervals.
ENVIRONMENTALLY FRIENDLY SERIES ULTIHYD BIO - BIODEGRADABLE HYDRAULIC OIL is formulated with synthetic esters to provide enhanced biodegradability and performance. It provides excellent thermal and oxidative resistance, leading to a long uid life and cleaner operations even in extreme operating conditions. MILES ULTIHYD BIO also utilizes the latest antiwear and anti-corrosion additives to provide exceptional levels of service and protection.
COMPRESSOR FLUIDS SERIES SB COMP OIL PLUS - Synthetic Blend Plus Compressor Lubricants are premium uids blended fromthe nest materials available. They have been proven in millions of horsepower hours. Series MILES SB COMPOIL PLUS compressor lubricants give outstanding service—even in moderately severe operating conditions. SERIES SXR COMP OIL - Polyalphaole ns (PAO) compressor uid utilizes the latest high-performance, full-synthetic base stocks and additives.
PROPERTIES Viscosity cSt @ 40°C PRODUCT Viscosity cSt @ 100°C Flash Point °F Pour Point °F Four Ball, 40 Kg, 1200 RPM, RPM, 167°F, 1 hr, Scar Dia mm Four Ball Weld Point, Kg Copper Corrosion, Demulsibility, 130°F, 24 Hr 30 Min SYNTHETIC BLEND COMP OIL PLUS - 32 33.2 6 420 -35 0.45 100 1a 40/40/0 COMP OIL PLUS - 46 48 7.9 440 -30 0.45 100 1a 40/40/0 COMP OIL PLUS - 68 68.4 9.7 453 -29 0.45 100 1a 40/40/0 COMP OIL PLUS - 100 100.1 12 465 -29 0.
TRI-ESTER PROPERTIES PRODUCT Viscosity cSt @ 40°C Viscosity cSt @ 100°C Viscosity Index Fire Point °F (°C) Pour Point °F(°C) TRIESTECH 135 13.6 96 585(307) -40 (-40) Copper Corrosion, 24 Demulsibility, 130°F, Hr 30 Min 1a 40/39/1 COMPRESSOR CLEANERS COMP CLEANER CONCENTRATE consists of premium, fast-acting concentrate cleaners. It is designed to be added to compressor lubricants to remove carbon, varnish and other hydrocarbon-related deposits.
MILES LAB ANALYSIS FOCUS ON PROACTIVE MAINTENANCE ACCESS ALL PREVIOUSLY DONE TESTS RELY ON PROFESSIONALISM Miles Analysis is the most detailed and accurate uid testing and analysis system on the market. Miles Analysis provides expert lubricant analysis to monitor equipment health through tests, including oil, grease, fuel, varnish, coolant, and chip testing. FOCUS ON PROACTIVE MAINTENANCE Miles Analysis will help you be proactive with the maintenance of your equipment.
PACKAGING CONTAINERS BOTTLE BOTTLE 16 OZ / 473 ml 1 QUART / 946 ml 2 LB / 0.907 kg JUGS PAIL 1 GAL / 3.79 L 7 LB / 3.18 kg 35 LB / 15.9 kg 5 GAL / 18.9 L KEG DRUM 120 LB / 54 kg 16 GAL / 60.
MILES LUBRICANTS LLC Toll Free: 877 – 683 – 8086 Fax: 631 – 229 – 8000 www.MilesLubricants.
