Product Manual

ManualsBrandsMilescraft ManualsPower ToolsTurnLock™ SignCrafter™Kit

Always the Better Idea.

Description Quantity Replacement Part #

Description Quantit Piece De Rechange#

La descripci n La cantidad Pieza De Recambio#

18" Rails 4 23003

Rails de 18 po (46 cm)

Varillas de 18"

End frames 2 70015 (Right)/70017 (Left)

Capuchons d’extrémité

Cofias

Support bridges 2 30013

Chevalets de support

Puentes de soporte

Rail joiners 2 23007

Raccords de rails

Empalmes de varillas

7" Base plate 1 30081

Plaque de base de 7 po (18 cm)

Placa de base de 7"

Base plate screws 3 00002

Vis de plaque de base

Tornillos de la placa de base

TurnLock™ bushings (7/16" and 5/8") 2 30036 (5/8")/30032 (7/16")

Douilles TurnLock (7/17 et 5/8 po)

Manguitos TurnLock (7/16" y 5/8")

Centering pin 1 30018

Goupille de centrage

Pasador de centrado

3/8" Core box router bit 1 70019

Fer à toupie à carotte de 3/8 po

Broca avellanada de ranuradora de 3/8"

Description Replacement Part #

Description Piece De Rechange#

La descripci n Pieza De Recambio#

1-1/2" templates: 4 of letters A, E, I, O; 2202

2 of all other letters, 2 of number 1-9

Gabarits de 1-1/2 po : 4 des lettres A, E, I, O ; 2 de toutes les autres lettres ; 2 de chiffres 1 à 9

Plantillas de 1-1/2": 4 de las letras A, E, I, O; 2 de las demás letras, 2 de los números 1-9

2-1/2" templates: 4 of letters A, E, I, O; 2201

2 of all other letters, 2 of number 1-9

Gabarits de 2-1/2 po : 4 des lettres A, E, I, O ; 2 de toutes les autres lettres ; 2 de chiffres 1 à 9

Plantillas de 2-1/2": 4 de las letras A, E, I, O; 2 de las demás letras, 2 de los números 1-9

Rockford, IL 61109 • Patent Pending • www.milescraft.com 1

Summary of content (8 pages)

PAGE 1
® Always the Better Idea.
PAGE 2
Safety Warning: Always wear safety glasses or eye shields before commencing power tool operation. Follow your manufacturer’s instructions for safety when using this attachment. Always wear protective eyewear when operating power tools. Always keep hands at a safe distance from spindles and cutting tools. Always disconnect power source before working with power tools. Assembling your SignCrafter Check the parts in your box against the parts list.
PAGE 3
Assembling your SignCrafter Assemblage du SignCrafter Montaje de su SignCrafter 6 7 8 9 bk 6 Choisir les lettres nécessaires pour constituer le mot à graver. Des gabarits d’espace sont fournis pour séparer les mots. 6 Seleccione las letras necesarias para deletrear la palabra que vaya a grabar. Se suministran plantillas en blanco para usar entre palabras. 7 Placer les lettre choisies dans la rainure à lettres. Remplir le restant du rail avec des lettres supplémentaires, pour combler l’espace vide.
PAGE 4
Assembling the TurnLock Base Plate to your Router Installation de la base TurnLock sur la toupie Montaje de la placa de base TurnLock en la ranuradora Remove power source from router Débrancher la toupie. Desconecte la fuente de alimentación de la ranuradora 1 2 3 4 5 Remove existing base from router by removing appropriate screws/bolts. Hold the Base Plate so that the screw mounting area is facing away from the router.
PAGE 5
Assembling the TurnLock Base Plate to your Router Installation de la base TurnLock sur la toupie 6 7 Install the provided TurnLock Bushing on to the Base Plate by twisting into the TurnLock opening in the center of the base. 6 7 Installer la douille TurnLock fournie dans la plaque de base en l’enfonçant avec un mouvement rotatif. 6 La plaque de base étant en contact avec la goupille de centrage, l’ajuster de manière à aligner la douille TurnLock sur la goupille de centrage.
PAGE 6
Using your SignCrafter Utilisation du SignCrafter Empleo de su SignCrafter You can rout a sign using most popular routers with provided guide bushings and base plate. Use a 7/16" bushing with 1/4" diameter or smaller router bit, when routing small letters. Note: Short 7/16" bushings such as those designed for use with Dovetail kits are not long enough and will destroy templates if used. Use 5/8" bushings with 1/2" or smaller router bit when routing large letters.
PAGE 7
Using your SignCrafter 6 Utilisation du SignCrafter Review the safety rules in router owners’ manual. Disconnect your electrical source and install router bushing and router bit. Set router bit 11/16" below router base, this will give 3/32" deep engraving. 7A If using a fixed based router: Lower router bushing into letter opening. With bushing in contact with inside of letter opening and Router bit above wood (NOT TOUCHING), start router motor.
PAGE 8
Using your SignCrafter Utilisation du SignCrafter Empleo de su SignCrafter bk Relocate the letter template assembly on the work piece filled with the next set of letters to be routed. In the end frame, there are two spacing slots between the letter guides. One is marked with an S for small letters, the other an L for large letters. bk Remettre le support de gabarits remplis des nouvelles lettres à graver en place sur le panneau.