Manual

ManualsBrandsMilescraft ManualsSafety1206B - SignCrafter

Always the Better Idea.

Description Quantity Replacement Part #

Description Quantit Piece De Rechange#

La descripcion La cantidad Pieza De Recambio#

18" Rails 4 23000

Rails de 18 po (46 cm)

Varillas de 18"

End caps 2 70048

Capuchons d’extrémité

Cofias

Support bridges 2 30013

Chevalets de support

Puentes de soporte

Rail joiners 2 23008

Raccords de rails

Empalmes de varillas

7" Base plate 1 30081

Plaque de base de 7 po (18 cm)

Placa de base de 7"

Base plate screws (#10 x 32 x 5/8”) 3 00002

Vis de plaque de base (#10 x 32 x 5/8”)

Tornillos de la placa de base (#10 x 32 x 5/8”)

Base plate screws (#10 x 24 x 5/8”) 3 00007

Vis de plaque de base (#10 x 24 x 5/8”)

Tornillos de la placa de base (#10 x 24 x 5/8”)

Metal Nose TurnLock™ bushing (5/8") 1 30114

Bage de guidage à bel TurnLock™ en métal (5/8)

Casquillos TurnLock™ de punta de metal (5/8po)

Centering pin 1 30018

Goupille de centrage

Pasador de centrado

Description Quantity Replacement Part #

Description Quantit Piece De Rechange#

La descripcion La cantidad Pieza De Recambio#

3/8" Core box router bit 1 70066

Fer à toupie à carotte de 3/8 po

Broca avellanada de ranuradora de 3/8"

Low Profile ‘C’ Clamps 2 20008

Brides en « C » basses

Perfil bajo ‘C’ abrazadera

2-1/2" templates: 2 of letters A, E, I, O; 2 2201

1 of all other letters, 1 of number 0-9

Gabarits de 2-1/2 po : 2 des lettres A, E, I, O ; 1 de toutes les autres lettres ; 1 de chiffres 0 à 9

Plantillas de 2-1/2": 2 de las letras A, E, I, O; 1 de las demás letras, 1 de los números 0-9

1206B

Model

Modéle

Modelo

Summary of content (9 pages)

PAGE 1
Model Modéle Modelo Description Description La descripcion Quantity Quantit La cantidad Replacement Part # Piece De Rechange# Pieza De Recambio# 18" Rails Rails de 18 po (46 cm) Varillas de 18" 4 23000 End caps Capuchons d’extrémité Cofias 2 Support bridges Chevalets de support Puentes de soporte ® 1206B Quantity Quantit La cantidad Replacement Part # Piece De Rechange# Pieza De Recambio# 3/8" Core box router bit Fer à toupie à carotte de 3/8 po Broca avellanada de ranuradora de 3/8" 1 70066
PAGE 2
Safety Warning: Always wear safety glasses or eye shields before commencing power tool operation. Follow your manufacturer’s instructions for safety when using this attachment. Always wear protective eyewear when operating power tools. Always keep hands at a safe distance from spindles and cutting tools. Always disconnect power source before working with power tools. Assembling your SignCrafter Check the parts in your box against the parts list.
PAGE 3
Assembling your SignCrafter Assemblage du SignCrafter Montaje de su SignCrafter 6 7 8 9 bk 6 Choisir les lettres nécessaires pour constituer le mot à graver. Des gabarits d’espace sont fournis pour séparer les mots. 6 Seleccione las letras necesarias para deletrear la palabra que vaya a grabar. Se suministran plantillas en blanco para usar entre palabras. 7 Placer les lettre choisies dans la rainure à lettres. Remplir le restant du rail avec des lettres supplémentaires, pour combler l’espace vide.
PAGE 4
Assembling the TurnLock Base Plate to your Router Installation de la base TurnLock sur la toupie Montaje de la placa de base TurnLock en la ranuradora Remove power source from router Débrancher la toupie. Desconecte la fuente de alimentación de la ranuradora 1 2 3 4 5 Remove existing base from router by removing appropriate screws/bolts. Hold the Base Plate so that the screw mounting area is facing away from the router.
PAGE 5
Assembling the TurnLock Base Plate to your Router Installation de la base TurnLock sur la toupie 6 7 Install the provided TurnLock Bushing on to the Base Plate by twisting into the TurnLock opening in the center of the base. 6 7 Installer la douille TurnLock fournie dans la plaque de base en l’enfonçant avec un mouvement rotatif. 6 La plaque de base étant en contact avec la goupille de centrage, l’ajuster de manière à aligner la douille TurnLock sur la goupille de centrage.
PAGE 6
Using your SignCrafter Utilisation du SignCrafter Empleo de su SignCrafter You can rout a sign using most popular routers with provided guide bushing and router bit. Un panneau peut être créé avec la plupart des toupies courantes, en utilisant les douille guide et mèche de toupie. Puede ranurar un letrero usando las ranuradoras más populares con los manguito de guía y broca de rebajadora. 1 2 Locate the first letter at the spot where you want the sign to start.
PAGE 7
Using your SignCrafter Utilisation du SignCrafter 5A If using a fixed based router: Lower router bushing into letter opening. With bushing in contact with inside of letter opening and Router bit above wood (NOT TOUCHING), start router motor. Lower bit into wood until router base is resting on both rails. The router bushing traces around the letter opening. When the letter is complete, turn router off. When motor stops, remove router. Proceed to engrave all letters in the template assembly.
PAGE 8
Using your SignCrafter Utilisation du SignCrafter Empleo de su SignCrafter 8 Relocate the letter template assembly on the work piece filled with the next set of letters to be routed. In the end frame, there are two spacing slots between the letter guides. Use the deeper slot for the included 2.5” templates. 8 8 9 Slide the letter template assembly until the pencil line is in line with the spacing slot. Retighten the guide clamp screws. Proceed to rout.
PAGE 9
© 2006 Milescraft, Inc. (0107) Pat # 7089978 www.milescaft.com Craftsman Porter Cable DeWalt Black&Decker Milwaukee Bosch Hitachi Freud Rigid DeWalt Craftsman Pro Makita Freud Triton Craftsman Craftsman 1 1 1 1 1 1 1 1 1 2 2 2 2 2 3 4 6 1, 5, 14 12 (315.)275.000 27500 DW616 26835 3606 FT2000E TRC001 1604, 1618 M12VC FT1700 2900 Series 1810-01, 1815-04, 1820-04, 1823, 1825-04, 1840, 1845-02 (315.