User Manual

26
hotspot to Milesight IoT Cloud via SN. Gateway will be added under “Gateways” menu.
E. The hotspot is online on Milesight IoT Cloud.
9.2 Connect UG65 to MQTT/HTTP Server
A. Go to “Packet Forwarder” → “General” page to enable the embedded network server.
Note: when you add any NS or modify the NS setting and click “Save & Apply”, the Helium program will
reboot and disconnect for dozens of seconds.
B. Go to “Packet Forwarder” → “Radio” page to select the antenna type, center frequency and channels.
The channels of the gateway and nodes need to be the same.