User Manual

24
SCREENS FOR PROFESSIONALS
SCREENS FOR PROFESSIONALS
45 cm
220 cm
Shorten or reduce the width of the
projection screen surface.
Shorten the case and shorten or reduce
the width of the projection screen surface.
Paint the case, slat bar and plastic
components in a different RAL colour.
When the screen needs to match a specific
colour scheme, Projecta can paint the case
in any colour specified.
Reverse installation of the surface so that
the projection side is located to the rear.
Specify this method when the projection
screen surface needs to exit the case
reversely because the normal screen path
is obstructed by an obstacle or because the
case is to be mounted to a beam. Note that
there are two reverse installation options.
The projection screen fabric can either be
configured to exit the case at the front or
the mounting brackets can be mounted in
reverse. Indicate clearly what your
requirement is so that Projecta can
produce the screen required.
Projection screen without black borders.
Extension of the projection screen
surface.
If required and technically feasible,
Projecta installs a longer projection
surface in the case.
PROJECTA ACADEMY
Custom solutions
Applied customisation:
Tensioned
Elpro Electrol