BOSCH VCA
About this Guide Dear Milestone Customer, With the purchase of Milestone XProtect Analytics – BOSCH VCA you have chosen a powerful and flexible solution. This guide is aimed at system administrators only. It describes how to install XProtect Analytics – BOSCH VCA. It also includes a brief introduction to the BOSCH VCA Administrator interface through which you subsequently configure your video content analysis solution.
Minimum System Requirements Surveillance Server Running XProtect Analytics Operating Microsoft® Windows® 2008 Server R1/R2 (32 bit System or 64 bit*), Windows Server 2003 (32 bit or 64 bit*), Windows 7 Professional (32 bit or 64 bit*), Windows 7 Enterprise (32 bit or 64 bit*), Windows 7 Ultimate (32 bit or 64 bit*), Windows Vista® Business (32 bit or 64 bit*), Windows Vista Enterprise (32 bit or 64 bit*), Windows Vista Ultimate (32 bit or 64 bit*), Windows XP Professional** (32 bit or 64 bit*).
Smart Client Used for Viewing Analytics Data Operating Microsoft Windows XP Professional (32 bit or 64 System bit*), Windows Server 2003 (32 bit or 64 bit*), Windows Server 2008 R1/R2 (32 bit or 64 bit*), Windows Vista Business (32 bit or 64 bit*), Windows Vista Enterprise (32 bit or 64 bit*), Windows Vista Ultimate (32 bit or 64 bit*), Windows 7 Professional (32 bit or 64 bit*), Windows 7 Enterprise (32 bit or 64 bit*) or Windows 7 Ultimate (32 bit or 64 bit*).
To check which DirectX version is installed on a computer, click Start, select Run..., and type dxdiag. When you click OK, the DirectX Diagnostic Tool window will open; version information is displayed near the bottom of its System tab. Should you require a DirectX update, the latest versions of DirectX are available from http://www.microsoft.com/downloads/.
Important Prerequisites XProtect Analytics works in tight integration with Microsoft Windows components as well as a range of different Milestone products. For your analytics solution to be able to work properly, you should verify that the following important components are in place on your system before you install XProtect Analytics: Milestone Surveillance System XProtect Analytics works with XProtect Professional, XProtect Enterprise and XProtect Corporate surveillance systems.
versions earlier than 7.0). For this purpose, the user must have full access rights to all cameras used in connection with the analytics solution. If Using XProtect Corporate If using XProtect Corporate, version 2.0b or later is required for integration with XProtect Analytics. If you require information about how to install XProtect Corporate, refer to the Administrator’s Manual available on the XProtect Corporate software DVD as well as from www.milestonesys.com.
XProtect Transact version 2.5c or later is required for integration with XProtect Analytics. If you require information about how to install XProtect Transact, refer to the XProtect Transact Administrator’s Manual available on the XProtect Transact software DVD as well as from www.milestonesys.com.
3. The Create Source window will open. Click the Add New… button. 4. You now get to specify a name for your source’s configuration. If in doubt, give the configuration the same name as you specified for your source in step 2. At this stage, do not change the port number or add any source XSD files. 5. When ready, click OK twice, then the Close button to close the Transact Administrator application.
analytics data received through the surveillance system’s XProtect Transact add-on component. Smart Client users download and install the plugin from the surveillance system server. The Smart Client should be installed first, then the plugin. For more information about the Analytics Alert Plugin, see the XProtect Analytics User’s Manual on the XProtect Analytics software DVD and also available from www.milestonesys.com.
Server-Side Installation Before installing the XProtect Analytics software, make sure you understand the system requirements and prerequisites (see the previous sections). Installing XProtect Analytics involves three tasks: First you install the XProtect Analytics software itself. Then you install the required XProtect Analytics plugin. This plugin gives your analytics solution the required functionality, in your case BOSCH video content analysis (VCA).
sources rather than cameras. 1. Go to the Milestone Systems website at www.milestonesys.com, click the Login link in the menu, and select Software Registration. 2. Log in to the Software Registration Service Center with your user name (e-mail address) and password.
8. Click the Add new MAC link to register the MAC address of the computer on which you are installing the XProtect Analytics software. Where do you find the MAC address? A MAC address is a 12-digit hexadecimal number (example: 0123456789AF), also called the computer’s Physical Address. To find a computer’s MAC address do the following: Click Start > Run. Type cmd in the Open field and click OK. Write ipconfig /all at the command prompt. Find the Physical Address.
2. On the wizard’s second page, read and accept the license agreement. Then click Next. 3. On the next wizard page, select Install licensed version and specify your user name, organization and the Software License Code (SLC) for the XProtect Analytics software itself. Trial version? If installing a trial version, select Install 30 days trial and specify your user name and organization. When ready, click Next. 4. On the next wizard page, select the folder in which you want to install XProtect Analytics.
4. Specify your Connection License Key (CLK). When ready, click Next. Trial version? This step is not required if you install a trial version. 5. Click the Install button to begin the actual installation. 6. When installation is complete, click the Finish button. Installing the Alert Plugin Server-Side Installer 1. Insert the XProtect Analytics software DVD, and click Install XProtect Analytics Alert Plugin ...
Recommended Configuration Sequence When using the Administrator application for the first time, we recommend that you do things in a certain order. For detailed information about each configuration step, refer to the separate XProtect Analytics BOSCH VCA Administrator’s Manual available on the XProtect Analytics software DVD as well as from www.milestonesys.com. You can check the list you go along.
Make sure the Milestone BOSCH VCA Server service is running (restart it if required). You can now use a Smart Client to connect to your analytics solution, and view video content analysis data combined with time-linked video. For more information, refer to the document XProtect Analytics User’s Manual on the surveillance system software DVDs and also available from www.milestonesys.com.
Built-in Help System XProtect Analytics features a very comprehensive built-in help system. To access the help system, simply click the help icon or press F1 on your keyboard when working in the XProtect Analytics Administrator application.
