Instruction Manual

Milestone Husky M30/M50
Administrator's Manual
www.milestonesys.com
159
Advanced configuration
Name
Description
Addresses
The inside and outside addresses used by the service.
You can change the inside and outside addresses for a service. To do this, click the Edit button and
enter the relevant inside and/or outside addresses. Note that you cannot edit all services. You can
delete a service registration from the system by clicking the Delete button. You are prompted for
confirmation before the service is deleted.
Configure server access
1. In the Management Application's navigation pane, expand Advanced Configuration, right-
click Server Access and select Properties.
2. Specify required properties for Server Access (on page 159), Local IP Ranges (on page 160),
and Language Support and XML Encoding (on page 161). Your system comes with two simple
schedule profiles, Always on and Always off, which you cannot edit or delete. If these do not
meet your needs, you can create any number of customized schedule profiles for each
camera. You can reuse a customized schedule profile for more than one purpose if you want
to.
3. Save your configuration changes by clicking Save in the yellow notification bar in the upper-
right corner of the Management Application.
When you use this option, you configure client users separately from clients' access. See Add
individual users (see "Add basic users" on page 164), Add user groups (on page 165), and Configure
user and group rights (on page 166).
Server access properties
Server access
When you configure server access (on page 159) (that is clients' access to the Milestone Husky
product server), specify the following:
Name
Description
Server name
Name of the Milestone Husky product server as it will appear in
clients. Client users with rights to configure their clients will see the
name of the server when they create views in their clients.
Local port
Port number to use for communication between clients and the
surveillance server. The default port number is 80; you can change
the port number if port 80 is used for other purposes in your
organization.