Milestone Systems Milestone System Watch Manual
Milestone System Watch Manual Contents ABOUT MILESTONE SYSTEM WATCH ...........................................4 INSTALL SYSTEM WATCH ..............................................................6 SET UP SYSTEM WATCH ................................................................7 ABOUT ERROR SCENARIOS ON THE ADAM BOX ........................8 INDEX ................................................................................................9 www.milestonesys.
Milestone System Watch Manual Copyright, trademarks and disclaimer Copyright 2013 Milestone Systems A/S. Trademarks XProtect is a registered trademark of Milestone Systems A/S. Microsoft and Windows are registered trademarks of Microsoft Corporation. App Store is a service mark of Apple Inc. Android is a trademark of Google Inc. All other trademarks mentioned in this document are trademarks of their respective owners.
Milestone System Watch Manual About Milestone System Watch Milestone System Watch is a utility intended for security personnel to monitor and detect hardware or software failures. In order to use System Watch, you must install it on a separate computer from the computer running the XProtect® software you want to monitor. One System Watch installation can watch a single XProtect server.
Milestone System Watch Manual Camera failures. If your XProtect surveillance system can no longer communicate with a camera, you can trigger an output on an I/O device. System Watch is compatible with XProtect Enterprise 8.1+, XProtect Professional 8.1+, XProtect Express 1.1+ and XProtect Essential 2.1+. System Watch enables XProtect systems to adhere to the French surveillance regulation APSAD R82 and can be used by APSAD-certified installers. www.milestonesys.
Milestone System Watch Manual Install System Watch 1. Run the installer. Depending on your security settings, you may receive one or more security warnings. Click the Run button if you receive a warning. 2. When the installation wizard starts, select language for the installer and then click Continue. 3. Read and accept the license agreement, and indicate if you want to participate in the Milestone data collection program. 4. Select Typical or Custom installation.
Milestone System Watch Manual Set up System Watch Once you have installed System Watch, you add an XProtect surveillance server by indicating its DNS name or IP address. Click Test to see if a connection has been successfully established between System Watch and your XProtect surveillance system. You add an ADAM 6060 box by indicating its DNS name or IP address. Note that ADAM 6060 boxes are enabled by default.
Milestone System Watch Manual About error scenarios on the ADAM box When a failure on recording servers, hard drives or cameras is detected, the ADAM box' pins indicates which type of failure you are experiencing. If pin 0 is on, it indicates that a failure has been detected (or that the Test button has been pushed), if pin 2 is on, it indicates there is a recording server failure, if pin 3 is on, it indicates a hard drive failure and if pin 4 is on, it indicates that there is a camera failure.
Milestone System Watch Manual Index A About error scenarios on the ADAM box • 8 About Milestone System Watch • 4 C Copyright, trademarks and disclaimer • 3 I Install System Watch • 6 S Set up System Watch • 7 www.milestonesys.
About Milestone Systems Founded in 1998, Milestone Systems is the global industry leader in open platform IP video management software. The XProtect platform delivers powerful surveillance that is easy to manage, reliable and proven in thousands of customer installations around the world.
