Installation Guide

Installation Instructions for Undermount Handmade and Apron Sinks
2 / 6
Miligore recommends that undermount sinks and routing of your solid surface material
should be installed by a professional installer for best results.
Requirements vary for installation in a granite, marble, stone, or butcher block countertop.
Please contact your fabricator for specific details.
Before installing, inspect the sink for damage. Do not install a damaged unit.
Remember, it is your responsibility to follow all local plumbing and building codes.
Templates are supplied only as a guide. Please check actually template against physical
sink unit for most accurate cut.
The instructions that follow are for installing a Miligore undermount stainless steel sinks in a solid
surface countertop only. Minimum thickness of the actual countertop material is one hall-inch. In
addition, a one inch build up around the sink is preferred.
TOOLS AND MATERIALS REQUIRED
Hardware Included