Installation Guide

Installation Instructions for Undermount Handmade and Apron Sinks
3 / 6
Installation
1
Preparing the countertop
□ Place the template (B) on the
countertop. Ensure the template is
centered on the counter so that it is
parallel to the counter edge and that the
installation hole will not interfere with the
structure of the cabinet.
□ Tape the template (B) to the countertop
to keep it in place and trace the cutout
line on the template (B) with a pencil.
2
Cutting the installation hole
□ Drill a pilot hole and cut the countertop
opening. Use the appropriate cutting
tool for the surface you are cutting and
cut along the inside of the template line.