MWC415 User Manual MWC415 User Manual 60GHz RF/BB Module with USB3.0 interface Rev. 1.
MWC415 User Manual Revision History Date Written by Rev. 20.006.17 Ken. Jung 1.0 Description MWC415 User manual .1.0 Release Address: 423 R&DB Center, 105 YoungTong-Gu, SuWon-Si, GyeongGi-Do, 16229 Korea http://www.miliwave.co.kr/ Tel. 070-8825-0630 Fax. Email: sales@miliwave.co.kr Copyright © Miliwave Inc. 2020. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Miliwave Co., Ltd.
MWC415 User Manual 1.Introduction 1.1 Overview Miliwave’s MWC415 module operates in the 60GHz unlicensed frequency band, IEEE802.11ad compliant, and is designed for only using for Smart Factory IoT Applications(ex. AMR(Autonounous Moving Robot, Machine Vision Camera) with , Point to Multi-Pont (PTMP) or Point to Point (PTP) bridge wireless communication, primarily for Line-of Sight (LOS) operation. The MWC415 module connects to a Linux based Host Communication Processor board via an available USB 3.
MWC415 User Manual 1.2 Abbreviations and Acronym Definitions Acronym Definition Gbps Giga bits per second GHz Giga Hertz IEEE Institute of Electrical and Electronics Engineers LED Light Emitting Diode LoS line-of-sight Mbps Mega bits per second MCS Modulation and Coding Scheme MHz Mega Hertz PTMP Point-to-multipoint Communication QAM Quadrature amplitude modulation 1.
MWC415 User Manual - Connectivity: USB 3.0 type A, 60GHz wireless 2. Technical Specifications - Aggregate capacity: 1.0Gbps uni-directional, 2.0 Gbps bi-directional - Latency : less than 1 millisecond round-trip - Security: AES-128 - I/O interface: USB 3.0(Type Micro-A) - Other Interface: LEDs indicators for connection status 3.0 Radio Specifications - Modulation : Single Carrier(SC) - Time Division Duplex - Frequencies: 59.40 ~ 61.56GHz(Ch.2) - Channel Bandwidth: 2.
MWC415 User Manual 5.0 Module Throughput - MCS Index : 0~12, - Modulation: BPSK, QPSK, 16QAM - Data Rate : Max PHY rate 4620 Mbit/s 6.0 Installation The MWC415 could only be installed with Host Communication Processor board at the factory level. There is no user serviceable parts in the MWC415 module 7.0 FCC Statement This device complies with Part 15 of the FCC Rules.
MWC415 User Manual This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
