User's Manual

MWC415 User Manual
Miliwave
3 / 7
1.Introduction
1.1 Overview
Miliwave’s MWC415 module operates in the 60GHz unlicensed frequency band, IEEE802.11ad
compliant, and is designed for only using for Smart Factory IoT Applications(ex. AMR(Autonounous
Moving Robot, Machine Vision Camera) with , Point to Multi-Pont (PTMP) or Point to Point (PTP)
bridge wireless communication, primarily for Line-of Sight (LOS) operation. The MWC415
module connects to a Linux based Host Communication Processor board via an available USB 3.0
port . All required drivers and firmware is pre-installed on the MWC415 module as a self-contained
device . However, the MWC415 module would not be operational unless it is connected to the Linux-
based Host Communication Processor board for PTP or PTMP bridge wireless communication.
For more information, please contact your Miliwave ([e-mail])
< Figure 1. MWC415 Use Case for Smart Factory(ex. AMR, Machine Vision Camera)>