User's Manual

MWC-434m User Manual
Miliwave
4 / 6
1.3 MWC-434m Module Description
The Miliwave's MWC-434m module in conjunction with the Host Communication Processor board can
function as a PTP or PTMP bridge communication . Main chracteristics of the MWC-434m module include:
- Adaptive Modulation and Link Adaptation: Up to 16QAM and MCS0-12 support
- Phased Array Planar Antena: EIRP 28dBm,
- Beam sweep range : Elevation 100°, Azimuth 100°
- Advanced Security: AES-128
- Compact Form Factor: 45mm x 50mm x25mm
- Connectivity: USB 3.0 Type-C, 60GHz wireless
2. Technical Specifications
- Aggregate capacity: Upto 1.4 Gbps uni-directional, Upto 2.8 Gbps bi-directional
- Latency : less than 1 millisecond round-trip
- Security: AES-128
- I/O interface: USB 3.0(Type-C)
- Other Interface: LEDs indicators for connection status
3.0 Radio Specifications
- Access Technlogy: Single Carrier beam-forming physical layer
- Time Division Duplex
- Frequencies: 59.40 ~ 65.88GHz
- Channel Bandwidth: 2.16 GHz
- Antenna:4x8 Air gap Phased Array Planar Antena beam-forming with 100degree horizontal and 100
degree vertical
- EIRP: 28 dBm
4.0 Mechanical, Power and Environmental Specification
- Dimension: 51.2mm x 45.6mm x25m
- Weight: 70g
- Power Consumption: 4W(Max)
- Operating Temperature: -40ºC ~ +80ºC
- Humidity: 5%~95%
5.0 Module Throughput
- MCS Index : 0-12,
- Modulation: BPSK,QPSK,16QAM
- Data Rate : Max PHY rate 4620 Mbit/s
6.0 Installation
The MWC-434m could only be installed with Host Communication Processor board at the factory level.
There is no user serviceable parts in the MWC-434m module
7.0 FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained
between the radiator (antenna) and all persons at all times.