Operating Instructions and Installation Instructions

9
millheat.com
EN
Reconnecting WiFi
Press the WiFi button 1 time. Relevant only if WiFi is already installed.
Deactivating WiFi
Press 1 time on the WiFi button. The heater can now be used as described on page 7
(usage without WiFi connection). Relevant only if WiFi is already installed.
Activating WiFi
Press «add heater» on the home screen in the Millheat-app. Follow the instructions in
the app.
See gure 8 on separate illustration sheet
See gure 10 on separate illustration sheet
See gure 9 on separate illustration sheet
Delete WiFi setting
Delete WiFi-settings: Press and hold WiFi button for 3 seconds.
The heater can also be reset to the factory settings by doing the following: Turn o the
heater’s main switch. Press and hold while you switch on the heater’s main switch.
See gure 11 on separate illustration sheet